SNDMECA IndustrieNos productions

Nous fabriquons des pièces à géométrie très complexe avec de très faibles tolérances (<10 microns) et fournissons ces pièces directement en bord de chaine prêtes à l’assemblage avec les traitements spécifiés.

Nos ingénieurs et techniciens sont garants des exigences et des délais d’industrialisation.
Nous gérons des nomenclatures complexes et propose une prestation complète incluant, outre la mécanique de précision, les services de montage, d’assemblage ou d’intégration de sous-ensembles mécaniques et électromécaniques.
Chaque marché appelle ses normes et ses exigences spécifiques qui sont prises en compte de la conception jusqu’aux opérations de finition. Nous réalisons les pièces à partir de barres, de lopins, de bruts forgés ou de fonderies.
Notre parc de machines numériques et le très haut niveau de qualification de nos équipes permettent de réaliser les opérations de tournage, fraisage, découpe EDM fil, enfonçage EDM, assemblage, ajustage, finition…
Grâce à un réseau de sous-traitants qualifiés, nous gérons de manière totalement intégrée tous types de procédés spéciaux : CND, traitements de surface, thermique, adhérisation….

Nous mettons à votre disposition une prestation complète et vous livrons un produit ou un sous-ensemble prêt à monter en bord de chaine.

Aluminum Alloys Stainless Steel High-Temp Alloys Titanium and Titanium Alloys Hardened Steels and Irons

Aluminum Alloys
DIN	AISI (SAE-ASTM)	Material Number	EN	AFNOR	BTS	JIS	UNS	UNI	SIS	SAE	ASTM	Manufacturer Reference
Al99.8	1080	3.0128	–	–	–	1A	–	–	–	–	–	–
Al99.5	1050	3.0255	–	A 59050 C	L 31	1B	–	–	–	–	–	–
SG-Al 99,5	–	3.0259	–	–	–	–	–	–	–	–	–	–
Al99.7	1070	3.0275	–	–	–	–	–	4508	–	–	–	–
AlMn	3103	3.0515	–	–	–	N3	–	–	–	–	–	–
AlMnCu	3003	3.0517	–	–	–	–	–	–	–	–	–	–
AlMn1Mg0.5	3005	3.0525	–	–	–	–	–	–	–	–	–	–
AlMn1Mg1	3004	3.0526	–	–	–	–	–	–	–	–	–	–
AlMgSiPb	–	3.0615	–	–	–	–	–	–	–	–	–	–
SG-Al 99,5Ti	–	3.0805	–	–	–	–	–	–	–	–	–	–
SG-Al 99,5 Ti	–	3.0805	–	–	–	–	–	–	–	–	–	–
AlCuSiMn	2014	3.1255	–	A-U4SG	–	H15	–	3581	–	–	–	–
AlCuMg 1	2017	3.1325	AW-2017 A	A-U4G	–	–	–	3579	–	–	–	–
AlCuMg 2	2024	3.1355	AW-2024	A-U4G1	–	L97	–	–	–	–	–	–
AlCuMgPb	–	3.1645	–	–	–	–	–	–	–	–	–	–
AlCuBiPb	2011	3.1655	–	A-U5PbBi	–	FC1	–	6362	–	–	–	–
AlMgSi 1	6082	3.2315	AW-6005 A	A-SGM0.7	–	H30	–	3571	–	–	–	–
AlMgSi0.5	6060	3.3206	–	–	–	–	–	–	–	–	–	–
AlMgSi0.7	6063	3.3206	–	A-GS	–	H9	–	3569	–	–	–	–
EAlMgSi0.5	6463	3.3207	–	–	–	91E	–	–	–	–	–	–
AlMg 1	5005	3.3315	AW-6082	A-G0.6	–	N41	–	5764-66	–	–	–	–
–	5050	3.3316	–	–	–	–	–	–	–	–	–	–
AlMg2.5	5052	3.3523	–	A-G2.5C	–	2L56	–	4574	–	–	–	–
AlMg 3	5754	3.3535	–	A-G3M	–	N5	–	3575	–	–	–	–
AlMg2.5Mn	5454	3.3537	–	A-G2.5MC	–	N51	–	7789	–	–	–	–
AlMg4Mn	5086	3.3545	–	–	–	–	–	–	–	–	–	–
SG-Al Mg 4,5 Mn Zr	–	3.3546	–	–	–	–	–	–	–	–	–	–
AlMg4,5Mn	5083	3.3547	–	A-G4.5MC	–	N8	–	7790	–	–	–	–
AlMg5	5056	3.3549	–	A-G5	–	N6	–	3576	–	–	–	–
AlMg 5	–	3.3555	–	–	–	–	–	–	–	–	–	–
AlZnMgCu0,5	7050	3.4144	–	AZ 4 GU/9051	L 86	–	–	811-04	–	–	–	–
AlZn4.5Mg1	7020	3.4335	–	A-Z5G	–	H17	–	–	–	–	–	–
AlZnMgCu0.5	7022	3.4345	–	–	–	–	–	–	–	–	–	–
AlZn5,5MgCu	–	3.4365	–	–	–	–	–	–	–	–	–	–
AlZnMgCu 1.5	7075	3.4365	AL-P7075	A-Z5GU	–	DTD5074	A97075	3735	–	7075	–	–
Al99.5H	1000	3.0250	–	A59050C	L31	–	–	–	–	–	–	–
Al99.8	–	3.0280	–	–	–	–	–	–	–	–	–	–
AlMg3Mn	–	–	–	–	–	–	–	–	–	–	–	–
–	2025	–	–	–	–	A 2025 FD	A92025	–	–	2025	B 247 2025	–
–	1100	–	–	–	–	–	–	–	–	–	–	–
–	3105	–	–	–	–	–	–	–	–	–	–	–
AlMg0.8Si	5657	–	–	–	–	–	–	–	–	–	–	–
–	6070	–	–	–	–	–	–	–	–	–	–	–
–	6262	–	–	–	–	–	–	–	–	–	–	–
–	7003	–	–	–	–	–	–	–	–	–	–	–
–	2050	–	–	–	–	–	–	–	–	–	–	–
–	7475	–	–	–	–	–	–	–	–	–	–	–
–	7175	–	–	–	–	–	–	–	–	–	–	–
–	7178	–	–	–	–	–	–	–	–	–	–	–
AlMg2Mo3	5251	–	–	A-G2M	–	N4	–	3574	–	–	–	–
–	6151	–	–	–	–	–	–	–	–	–	–	–
–	7001	–	–	–	–	–	–	–	–	–	–	–
–	7040	–	–	–	–	–	–	–	–	–	–	–

Low-Silicon Aluminum Alloys and Magnesium Alloys Content: Si
DIN	AISI (SAE-ASTM)	Material Number	EN	AFNOR	BTS	JIS	UNS	UNI	SIS	SAE	ASTM	Manufacturer Reference
SG-Al99,8	–	3.0286	–	–	–	–	–	–	–	–	–	–
G-AlCu 4 TiMg	–	3.1371	–	–	–	–	–	–	–	–	–	–
G-AlCu 4 TiMg	–	3.1371	–	–	–	–	–	–	–	–	–	–
G-AlCu 5 Ni 1,5	–	3.1754	–	–	–	–	–	–	–	–	–	–
G-AlCu 4 Ti	–	3.1841	–	–	–	–	–	–	–	–	–	–
G-AlSi 5 Cu 1	–	3.2131	–	–	–	–	–	–	–	–	–	–
G-AlSi 6 Cu 4	–	3.2151	–	–	–	–	–	–	–	–	–	–
G-AlSi 8 Cu 3	–	3.2161	–	–	–	–	–	–	–	–	–	–
G-AlSi 9 Cu 3	–	3.2163	–	–	–	–	–	–	–	–	–	–
G-AlSi 1 1	–	3.2211	–	–	–	–	–	–	–	–	–	–
SG-AlSi 5	–	3.2245	–	–	–	–	–	–	–	–	–	–
SG-AlSi 5	–	3.2245	–	–	–	–	–	–	–	–	–	–
G-AlSi 5 Mg	–	3.2341	–	–	–	–	–	–	–	–	–	–
G-AlSi 7 Mg	4218 B	3.2371	–	–	–	–	–	–	–	–	–	–
G-AlSi 9 Mg	–	3.2373	–	–	–	–	–	–	–	–	–	–
G-AlSi 10 Mg	–	3.2381	–	–	–	–	–	–	–	–	–	–
G-D AlSi 10 Mg	–	3.2382	–	–	–	–	–	–	–	–	–	–
G-AlSi 10 Mg(Cu)	A 360.2	3.2383	–	–	LM 9	–	–	–	4253	–	–	–
G-D AlSi 12	A 413.0	3.2582	–	–	–	–	–	–	4247	–	–	–
SG-AlSi 12	–	3.2585	–	–	–	–	–	–	–	–	–	–
G-D AlSi 12(Cu)	–	3.2982	–	–	–	–	–	–	–	–	–	–
AlMgSiCu	6061	3.3211	–	A-GSUC	–	H20	–	6170	–	–	–	–
G-AlMg 3 Si	–	3.3241	–	–	–	–	–	–	–	–	–	–
G-AlMg 5 Si	–	3.3261	–	–	–	–	–	–	–	–	–	–
G-D AlMg 9	–	3.3292	–	–	–	–	–	–	–	–	–	–
G-AlMg5Si(Cu,Mn)	–	3.3458	–	–	–	–	–	–	–	–	–	–
SG-AlMg 3	–	3.3536	–	–	–	–	–	–	–	–	–	–
G-AlMg 3	–	3.3541	–	–	–	–	–	–	–	–	–	–
SG-AlMg 4,5 Mn	–	3.3548	–	–	–	–	–	–	–	–	–	–
SG-AlMg 5	–	3.3556	–	–	–	–	–	–	–	–	–	–
G-AlMg 5	–	3.3561	–	–	–	–	–	–	–	–	–	–
G-MgZn 4 SE1Zr1	ZE41	3.5101	MCMgZn 4 RE 1 Zr	G-Z4TR	MAG 5	–	–	–	–	–	–	–
G-MgZn5Th2Zr1	–	3.5102	–	–	–	–	–	–	–	–	–	–
MgSE3Zn2Zr1	EZ33	3.5103	MCMgRE 3 Zn 2 Zr	G-TR3Z2	MAG 6	–	–	–	–	–	–	–
MgAl9Zn1	–	3.5104	–	–	–	–	–	–	–	–	–	–
G-MgTh3Zn2Zr1	–	3.5105	–	–	–	–	–	–	–	–	–	–
G-MgAg3SE2Zr1	QE22	3.5106	MCMgRE2Ag2Zr	G-Ag22.5	MAG 12	–	–	–	–	–	–	–
G-DMgAl6Zn1	–	3.5612	–	–	–	–	–	–	–	–	–	–
G-DMgAl6	–	3.5662	–	–	–	–	–	–	–	–	–	–
G-MgAl8Zn1	AZ81	3.5812	MCMgAl8Zn1	G-A9	MAG 1	–	–	–	–	–	–	–
G-MgAl9Zn1	AZ91	3.5912	MCMgAl 9Zn1	G-A9Z1	MAG 7	–	–	–	–	–	–	–
G-MgAl8Zn1	–	3.5200	–	–	–	–	–	–	–	–	–	–
G-DMgAl4Si1	AS41	3.5470	MCMgAl4Si	G-A4S1	–	–	–	–	–	–	–	–
G-AlZn10Si8Mg	–	–	–	–	–	–	–	–	–	–	–	–
AlSi7Mg	AS7G	–	–	–	–	–	–	–	–	–	–	–
–	2117	–	–	–	–	–	–	–	–	–	–	–
AlCuMgNi2	2218	–	–	–	–	–	–	–	–	–	–	–
–	2091	–	–	–	–	–	–	–	–	–	–	–
–	8090	–	–	–	–	–	–	–	–	–	–	–
–	2090	–	–	–	–	–	–	–	–	–	–	–
–	2224	–	–	–	–	–	–	–	–	–	–	–
–	2094	–	–	–	–	–	–	–	–	–	–	–
–	2095	–	–	–	–	–	–	–	–	–	–	–
–	2097	–	–	–	–	–	–	–	–	–	–	–
–	2098	–	–	–	–	–	–	–	–	–	–	–
–	2099	–	–	–	–	–	–	–	–	–	–	–
–	2195	–	–	–	–	–	–	–	–	–	–	–
–	2196	–	–	–	–	–	–	–	–	–	–	–
–	2197	–	–	–	–	–	–	–	–	–	–	–
–	2198	–	–	–	–	–	–	–	–	–	–	–
–	2297	–	–	–	–	–	–	–	–	–	–	–
–	2397	–	–	–	–	–	–	–	–	–	–	–
–	8017	–	–	–	–	–	–	–	–	–	–	–
–	8024	–	–	–	–	–	–	–	–	–	–	–
–	8091	–	–	–	–	–	–	–	–	–	–	–
–	8093	–	–	–	–	–	–	–	–	–	–	–
–	2199	–	–	–	–	–	–	–	–	–	–	–

High-Silicon Aluminum Alloys and Magnesium Alloys Content: Si >12.2%
DIN	AISI (SAE-ASTM)	Material Number	EN	AFNOR	BTS	JIS	UNS	UNI	SIS	SAE	ASTM	Manufacturer Reference
G-AlSi12(Cu)	A 413.1	3.2583	–	–	LM 20	–	–	–	4260	–	–	–
G-AlSi12	A 413.2	3.2581	–	–	LM 6	–	–	–	4261	–	–	–
G-AlSi17Cu4Mg	–	–	–	–	–	–	–	–	–	–	–	–
GK-AlSi18CuNiMg	–	–	–	–	–	–	–	–	–	–	–	–
GK-AlSi21CuNiMg	–	–	–	–	–	–	–	–	–	–	–	–
GK-AlSi12CuNiMg	–	–	–	–	–	–	–	–	–	–	–	–
GK-AlSi25CuNiMg	–	–	–	–	–	–	–	–	–	–	–	–
G-AlSi21CuNiMg	–	–	–	–	–	–	–	–	–	–	–	–
–	4032	–	–	–	–	–	–	–	–	–	–	–

Stainless Steel High-Strength Austenitic Stainlessand Cast Stainless Steels Tensile Strength RM (MPa): 600–800 - Hardness (HB): 150–230 (HRC): <25
DIN	AISI (SAE-ASTM)	Material Number	EN	AFNOR	BTS	JIS	UNS	UNI	SIS	SAE	ASTM	Manufacturer Reference
X1CrNiMoN25-22-2	–	1.4466	725LN	DMV25-22-2	–	–	–	X1CrNiMoN25-22-2	–	–	–	–
X1NiCrMoCuN25-20-6	–	1.4529	–	–	–	–	–	–	–	–	–	Uranus B266Mo
GX2NiCrMoCuN25-20	–	1.4536	GX2CrNiMoCuN25-20-6	–	–	–	J94650	–	–	–	–	–
X1CrNiMoCuN25-25-5	–	1.4537	X1CrNiMoCuN 25-25-5	X1CrNiMoCuN 25-25-5	–	–	–	X1CrNiMoCuN 25-25-5	–	–	–	–
X6CrNiTi1810	321	1.4541	X6CrNiTi1810	Z6CNT18-10	321S12	SUS321	S32100	X6CrNiTi1811	2337	–	–	–
A700	321	1.4544	–	Z10CNT1811	304S31	–	J92630	X6CrNiTi1811	–	–	–	–
X1CrNiMoCuN20-18-7	–	1.4547	X1 CrNiMoCuN20-18-7	X1 CrNiMoCuN20-18-7	X1 CrNiMoCuN20187	–	S31254	X1 CrNiMoCuN20-18-7	–	–	–	Uranus B256Mo
X2NiCrAlTi32-20	–	1.4558	–	–	–	NCF800TB	–	–	–	–	–	–
X1NiCrMoCuN31-27-4	–	1.4563	X1NiCrMoCu31-27-4	X1NiCrMoCuN 31-27-4	–	–	–	X1NiCrMoCuN 31-27-4	2584	–	–	–
X3CrNiCu18-9-4	–	1.4567	X3CrNiCu18-9-4	304CU	394S17	SUSXM7	–	304K	–	–	–	–
X6CrNiMoTi17-12-2	316Ti	1.4571	X6CrNiMoTi17-12-2	Z6CNDT17-12	320S31	SUS316Ti	–	X6CrNiMoTi17-12	2350	–	–	–
GX5CrNiMoNb23-9	–	1.4572	–	–	–	–	–	–	–	–	–	–
X10CrNiMoTi18-12	316Ti	1.4573	–	–	320S33	SUS316Ti	S31635	X6CrNiMoTi17-13	–	–	–	–
X10CrNiMoNb18-12	318	1.4583	–	–	–	–	–	X6CrNiMoNb17-13	–	–	–	–
X2CrNiCu19-10	–	1.4650	X2CrNiCu19-10	TX304L	–	–	–	–	–	–	–	–
X1CrNiMoCuN24-22-8	–	1.4652	–	–	–	–	S32654	–	–	–	–	654SMO®
153MA	–	1.4818	X6CrNiSiNCe19-10	–	–	–	S30415	–	–	–	–	153MA™
X20CrNiSi25-4	–	1.4821	X15CrNiSi25-4	Z20CNS25-04	–	–	S44635	X20CrNiSi25-4	–	–	–	–
X15CrNiSi20-12	309	1.4828	X15CrNiSi20-12	Z15CNS20-12	309S24	SUH309	S30900	X16CrNiSi25-20	–	–	–	–
X7CrNi23-14	309S	1.4833	X12CrNi23-13	Z15CN24-13	309S24	SUS309S	J93400	X6CrNi23-14	–	–	–	–
353MA	–	1.4854	X6NiCrSiNCe35-25	–	–	–	S35315	–	–	–	–	353MA®
X8NiCrSi38-18	–	1.4862	–	Z12NCS37-18	NA17	–	N08330	–	–	–	–	–
X33CrNiMnN23-8	–	1.4866	X33CrNiMnN23-8	X33CrNiMnN23-8	–	–	–	–	–	–	–	–
X55CrMnNiN20-8	EV12	1.4875	X55CrMnNiN20-8	Z55CMN20-08Az	–	–	S63012	–	–	–	–	–
X12CrNiTi18-9	321	1.4878	X10CrNiTi18-10	Z6CNT18-12	321S20	SUS321	S32100	X6CrNiTi18-11	2337	–	–	ACX315
X70CrMnNiN21-6	EV11	1.4881	–	–	–	–	S63011	X70CrMnNiN21-6	–	–	–	–
X50CrMnNiNbN21-9	–	1.4882	X50CrMnNiNbN21-9	Z50CMNNb21-09	–	–	–	–	–	–	–	–
X7CrNiNb18-10	–	1.4912	X7CrNiNb18-10	X7CrNiNb18-10	–	SUS347H	S34709	–	–	–	–	–
X6CrNiMo17-13	316H	1.4919	X6CrNiMo17-12-2	Z6CND17-13B	316S51	–	S31609	–	–	–	–	–
X8CrNiTi18-10	321H	1.4941	X6CrNiTiB18-10	Z6CNT18-10B	–	–	–	X6CrNiTiB11	–	–	–	–
X4NiCrTi25-15	A660	1.4943	–	Z6NCTDV25-15B	HR251	SUH660	S66286	–	–	–	–	Discaloy
X6CrNiWNb16-16	–	1.4945	–	–	–	–	–	–	–	–	–	–
X6CrNi18-11	–	1.4948	X6CrNi18-10	Z6CN18-09	304S51	–	S30480	X5CrNi1810KW	2333	–	–	–
X6CrNi25-20	–	1.4951	310H	–	–	–	–	–	–	–	–	–
X8CrNiNb16-13	–	1.4961	–	–	347S51	–	–	–	–	–	–	–
X6NiCrTiMoVB25-15-2		1.4980			–	–	S66286					–
Esshete 1250	–	1.4982	X10CrNiMoMnNbVB 15-10-1	X10CrNiMoMnNbVB 15-10-1	–	–	S21500	–	–	–	A213	Esshete 1250
X8CrNiMoBNb16-16	–	1.4986	X7CrNiMoBNb16-16	–	–	–	–	–	–	–	–	–
X12CrNi17-7	301	1.4310	X12CrNi17-7	Z12CN17-07	301S21	SUS301	S30100	X12CrNi17-07	2331	–	–	–
GX40CrNi27-4	–	1.4340	–	–	–	–	J92615	GX35CrNi28-05	–	–	–	–
X5CrNi18-9	304	1.4350	1	Z6CN18-09	304S31	SUS304	S30400	X5CrNi18-10	2332/2333	–	A276	–
X15CrNiMn18-8	–	1.4370	X15CrNiMn180-8KE	Z8CNM19-09-07	307S98	–	–	–	–	–	–	–
GX10CrNiMo18-9	S32750	1.4410	X2CrNiMoN25-7-4	Z5CND20-10M	–	SCS14A	S32750	X2CrNiMoN25-7-4	–	–	–	–
X5CrNiMo18-11	–	1.4420	–	–	315S16	–	–	–	2340	–	–	–
X6CrNiNb18-10	347	1.4550	X6CrNiNb18-10	Z6CNNb18-10	347S17	SUS347	S34700	X6CrNiNb18-11	2338	–	–	–
X6CrNiMoNb17-12-2	316Cb	1.4580	X6CrNiMoNb17-12-2	Z6CNDNb17-12	318S17	–	–	X6CrNiMoNb17-12	–	–	–	–
X3CrNiMoN17-13	–	1.4910	X3CrNiMoN17-13-3	–	–	–	–	X2CrNiMoN17-12	–	–	–	–
X6CrNi23-13	–	1.4950	309H	–	–	–	–	–	–	–	–	–
X6NiCrTiMoVB 25-15-2	A286	1.4980	X6NiCrTiMoVB 21-15-2	–	286S31	–	S66286	–	–	–	–	Incoloy169® A286
–	XM-19	–	–	–	–	–	S20910	–	–	–	F1314	–
–	303 plusX	–	–	–	–	–	S30310	–	–	–	XM-5	303 plusX
X2CrNi18-13-3	–	–	–	–	–	–	–	–	–	–	–	Staybrite®4435NCu
–	218	–	–	–	–	–	S21800	–	–	–	–	Nitronic 60
–	201LN	–	–	–	–	–	S20153	–	–	–	–	–
X2CrNiMoN17-13-3	–	–	–	Z2CND17-13	–	–	–	X2CrNiMoN17-13-3	–	–	–	AL316LXN
–	–	–	–	–	–	–	S31675	–	–	–	F1586	–
–	–	–	–	–	–	–	–	–	–	–	–	P558
X1NiCrMoCu22-24-6	–	–	–	–	–	–	–	–	–	–	–	Uranus B66
–	–	–	–	–	–	–	–	–	–	–	–	–
–	–	–	–	–	–	–	–	–	–	–	–	ATIStaballoy® AG17®
–	–	–	–	–	–	–	–	–	–	–	–	P530
X1NiCrMoCu31-27-4	–	–	–	–	–	–	N08028	–	–	–	–	Uranus B28
–	–	–	–	–	–	–	–	–	–	–	–	P750
–	–	–	–	–	–	–	–	–	–	–	–	P750-I
X4CrNiMoN21-94	–	–	–	–	–	–	–	–	–	–	F1586	M30NW
–	–	–	–	–	–	–	–	–	–	–	–	P550
–	–	–	–	–	–	–	–	–	–	–	–	P580
–	–	–	–	–	–	–	–	–	–	–	–	P650
–	–	–	–	–	–	–	–	–	–	–	–	–

Stainless Steel (continued) Duplex Stainless Steel Tensile Strength RM (MPa): <800 - Hardness (HB): 135–275 (HRC): <30
DIN	AISI (SAE-ASTM)	Material Number	EN	AFNOR	BTS	JIS	UNS	UNI	SIS	SAE	ASTM	Manufacturer Reference
GX120CrMo29-2	–	1.4138	–	–	–	–	–	–	–	–	F30M	PK324
X2CrMnNiN21-51	–	1.4162	–	–	S32101	–	–	–	–	–	–	LDX2101
GX6CrNiN26-7	–	1.4347	GX6CrNiN26-7	–	–	–	–	–	–	–	–	–
X2CrNiN23-4	S32304	1.4362	SAF23-04	35N	S32304	–	–	X2CrNiN23-4	2327	–	A240	–
X2CrNiMoSi19-5	S31500	1.4417	GX2CrNiMoN25-7-3	GX2CrNiMoN25-7-3	S39215	–	–	–	2376	–	–	–
X2CrNiMoN22-5-3	S31803	1.4462	X2CrNiMoN 22-5-3	Z3CND22-05AZ	S31803,S32205	318S13	SUS329J3L	X2CrNiMoN22-5-3	2377	F51	2205	–
GX6CrNiMo24-82	–	1.4463	–	–	–	–	–	–	–	–	–	–
GX2CrNiMoN25-63	–	1.4468	GX2CrNiMoN25-6-3	GX2CrNiMoN25-6-3	–	–	–	–	–	–	–	–
GX2CrNiMoN26-74	–	1.4469	GX2CrNiMoN26-7-4	GX2CrNiMoN26-7-4	J93404	–	–	GX2CrNiMoN26-7-4	–	–	–	–
X2CrNiMoCuWN25-74	–	1.4501	X2CrNiMoCuWN25-74	X2CrNiMoCuWN 25-7-4	S32760	–	–	X2CrNiMoCuWN 25-7-4	–	–	F55	F55
X2CrNiMoCuN25-63	2507	1.4507	X2CrNiMoCuN25-6-3	DMV25-7Cu	–	–	–	329SK	–	–	–	Uranus 52N+
GX2CrNiMoCuWN25-84	–	1.4508	X6CrNiCu18104KD	Z4CNUD17-11-03FF	–	–	–	–	–	–	–	–
GX2CrNiMoCuN 25-63-3	–	1.4517	GX2CrNiMoCuN 25-6-3-3	GX2CrNiMoCuN 25-6-3-3	–	–	–	GX2CrNiMoCuN 25-6-3-3	–	–	–	–
X4CrNiMoNb25-7	–	1.4582	–	–	–	–	SCS22	–	–	–	–	PK343
BGH45-93	–	1.4593	GX3CrNiMoCuN24-62-3	–	–	–	–	–	–	–	–	Noridur®
X4CrNiMo27-52	329	1.4460	X3CrNiMo27-5-2	X2CrNiMo25-7-3	S32900	–	SUS329J1	X3CrNiMo27-5-2	2324	–	A240	10RE51
GX2CrNiMoN22-53	–	1.4470	GX2CrNiMoN22-5-3	GX2CrNiMoN22-5-3	–	–	–	GX2CrNiMoN22-5-3	–	–	–	–
–	S32550	–	–	–	S32550	–	–	–	–	–	–	Ferralium® alloy 255
–	–	–	–	–	S32003	–	–	–	–	–	–	–
–	–	–	–	–	S80211	–	–	–	–	–	–	–
–	–	–	–	–	S32550	–	–	–	–	–	–	–
–	–	–	–	–	S34565	–	–	–	–	–	–	–
X2CrNiMoN25-63	–	–	–	–	–	–	–	–	–	–	–	Uranus 47N+
–	–	–	–	–	–	–	–	F60	–	–	32760	Zeron® 100

High-Temp Alloys Iron-Based, Heat-Resistant Alloys Tensile Strength RM (MPa): 500–1200 - Hardness (HB): 160–260 (HRC): 25–48
DIN	AISI (SAE-ASTM)	Material Number	EN	AFNOR	BTS	JIS	UNS	UNI	SIS	SAE	ASTM	Manufacturer Reference
X10 Cr25	–	1.3811	–	–	–	–	–	–	–	–	–	–
D1a	–	1.3915	–	–	–	–	–	–	–	–	–	–
D3	–	1.3916	X210Cr12	Z200C12	BD 3	–	–	X205Cr12KU	–	–	–	–
RNi12	–	1.3926	–	–	–	–	–	–	–	–	–	–
RNi8	–	1.3927	–	–	–	–	–	–	–	–	–	–
GX2NiCoMoTi17-10	–	1.6351	–	–	–	–	–	–	–	–	–	Maraging
X2NiCoMo18-9-5	–	1.6358	–	16NCD13	–	–	K93120	–	–	–	–	Maraging 300
X2NiCoMo18-8-5	6501, 6512, 6520	1.6359	S162	Z2NKD18-8	–	–	K92890	–	–	–	ASTM A646	Maraging 250
X2NiCoMo18-8-5	–	1.6359	–	–	–	–	K92890	–	–	–	–	Maraging
X1CrNiCoMo13-8-5	–	–	–	–	–	–	–	–	–	–	–	Maraging
Ni36	–	1.3910	–	–	–	–	–	–	–	–	–	Magnifer 36
Ni46	–	1.3920	–	–	–	–	–	–	–	–	–	–
X2CrNiCoMo12-8-5	–	1.6980	–	–	–	–	–	–	–	–	–	Maraging
–	B463	2.4660	–	–	–	–	UNS N08020	–	–	–	B463	20CB-3
–	A666	–	–	–	–	–	–	–	–	–	A666	39985
–	B753	–	–	–	–	–	–	–	–	–	B753	AL 4750
–	S66286	–	–	–	–	NAS 660	S66286	A-286	–	–	–	ATI A286™
–	–	–	–	–	–	–	K92810	–	–	–	–	C-200
–	6514	–	–	–	–	–	K93120	–	–	–	–	C-300
–	–	–	–	–	–	–	–	–	–	–	–	C-350
–	–	–	–	–	–	–	–	–	–	–	–	T-200
–	6518, 6519, 6591	–	–	–	–	–	–	–	–	–	–	T-250
–	–	–	–	–	–	–	–	–	–	–	–	T-300
–	5725	–	–	Z3NCT25	–	–	–	–	–	SAE 16-25-6	–	Discaloy 16-25-6
–	A638	–	–	Z3NCT25	–	–	–	–	–	Discaloy	A638	Discaloy 24
–	–	–	–	–	–	–	R30556	–	–	–	–	Haynes® 556
X12CrCoNi21-20	5768	–	–	Z12CKNDWNb21-20-20	–	–	–	–	–	–	–	Haynes® 556
–	F30	–	–	–	–	–	–	–	–	Invar	F30	Invar 42
–	5768	–	–	Z12CNKDW20	–	–	R30155	–	–	–	–	Multimet N-155
–	–	–	–	–	–	–	–	–	–	–	–	Multimet N-156
X40CoCrNi20-20	5533	–	–	Z42CKNDW	–	–	–	–	–	–	–	S 590
X2NiCrAlTi32-20	–	–	–	–	–	–	–	–	–	–	–	Sanicro 30
–	665	–	–	Z8NCTDA2613	–	–	–	–	–	–	–	W-545

High-Temp Alloys (continued) Cobalt-Based, Heat-Resistant Alloys Tensile Strength RM (MPa): 1000–1450 - Hardness (HB): 250–450 (HRC): 25–48
DIN	AISI (SAE-ASTM)	Material Number	EN	AFNOR	BTS	JIS	UNS	UNI	SIS	SAE	ASTM	Manufacturer Reference
CoCr26Ni9 Mo	–	2.4681	–	–	–	–	–	–	–	–	–	–
CoCr25NiW	–	2.4682	–	KC25WN	–	–	–	–	–	–	A567	Stellite® 31 (X40)
CoCr22NiW	–	2.4683	–	–	–	–	–	–	–	–	–	–
CoCr28 Mo	–	2.4691	–	KC27D5NFe	–	–	–	–	–	–	F-75	HS 21
CoCr20Ni15 Mo	–	2.4711	–	–	–	–	–	–	–	–	–	–
CoCr29 Mo	–	2.4723	–	–	–	–	–	–	–	–	–	–
CoCr33 W	–	2.4775	–	–	–	–	–	–	–	–	–	–
CoCr28	–	2.4778	–	–	–	–	–	–	–	–	–	–
CoCr28Nb	–	2.4779	–	–	–	–	–	–	–	–	–	–
–	–	2.4964	–	–	–	–	S35045	–	–	–	F90	F 90
–	–	2.4964	–	KC20WN	–	–	R30605	–	–	–	–	Haynes® 25
CoCr20W15Ni	–	2.4964	–	KC20WN	HR240	–	R30605	–	–	–	5759	L 605
CoCr20W15Ni	–	2.4964	–	KC20WN	–	–	CAST Version of L605	–	–	–	5759	Stellite® 25
NiCr19Co11MoTi	5399	2.4973	–	NC 19 KDT	–	–	–	–	–	–	–	–
CoCr20Ni20 W	–	2.4979	–	–	–	–	–	–	–	–	5534	S 816
CoCr20NiW	–	2.4989	–	–	–	–	–	–	–	–	–	–
–	–	–	–	CoCr28Mo	–	–	R31537 & R31538	–	–	–	F1537	F 1537
–	–	–	–	–	–	–	–	–	–	–	F562	F 562
–	–	–	–	–	–	–	–	–	–	–	F563	F 563
–	–	–	–	KC22N22W14Fe	–	–	R30188	–	–	–	–	Haynes® 188
CoCr20W15 Ni	670	–	–	KC20WN	–	–	–	–	–	–	–	HS 25
CoCr26Ni14 Mo	–	–	–	–	–	–	–	–	–	–	5380	HS 30
CoCr19W14 NiB	–	–	–	–	–	–	–	–	–	–	–	HS 36
–	–	–	–	–	–	–	–	–	–	–	–	L 251
CoCrW10TaZrB	–	–	–	KC21W10Ta9	–	–	–	–	–	–	–	MAR-M 302
CoCr22W9TaZrNb	–	–	–	KC21W9Ta	–	–	–	–	–	–	–	MAR-M 322
CoCr24Ni10WTaZrB	–	–	–	KC23N10W7Ta	–	–	–	–	–	–	–	MAR-M 509
–	–	–	–	KC20N20Ta7	–	–	–	–	–	–	–	MAR-M 905
CoCr20Ni20Ta	–	–	–	KC20N20Ta7	–	–	–	–	–	–	–	MAR-M 918
–	–	–	–	–	–	–	R30159	–	–	–	–	MP159
–	–	–	–	–	–	–	R30035	–	–	–	–	MP35N
–	–	–	–	KC33W13	–	–	–	–	–	–	–	Stellite® 1
–	–	–	–	KC28W8	–	–	–	–	–	–	–	Stellite® 12
–	–	–	–	KC22N22W14Fe	–	–	–	–	–	–	–	Stellite® 188
–	–	–	–	KC26NW	–	–	–	–	–	–	–	Stellite® 6
–	–	–	–	–	–	–	–	–	–	–	–	Stellite® 8 (F75)
CoCr25Ni20MoWNb	–	–	–	KC25N20DFeWNb	–	–	–	–	–	–	–	V-36
CoCr21Mo11W	–	–	–	KC21W11ANbT	–	–	–	–	–	–	–	WI-52
–	–	–	–	KC25N10W7Fe	–	–	–	–	–	–	–	X 45
–	–	–	–	–	–	–	–	–	–	J-1570	–	–
K13C20N126Fe15D7	–	–	–	K13C20N126Fe15D7	–	–	R3003 & R3008	–	–	–	F1058	–

High-Temp Alloys (continued) Nickel-Based, Heat-Resistant Alloys Tensile Strength RM (MPa): 600–1700 - Hardness (HB): 160–450 (HRC): <48
DIN	AISI (SAE-ASTM)	Material Number	EN	AFNOR	BTS	JIS	UNS	UNI	SIS	SAE	ASTM	Manufacturer Reference
X7NiCrCoMo54-20	–	1.2789	–	–	–	–	–	–	–	–	–	–
Ni 99-7Mg0-07	–	2.4053	–	–	–	–	J24053	–	–	–	A 915 J24053	–
LC-Ni 99-6	–	2.4061	–	–	–	–	N02201	–	–	–	–	–
–	–	2.4066	–	–	–	–	N02200	–	–	–	–	200
Ni99-2	Nickel 200	2.4066	–	–	NA11	–	N02200	–	–	–	–	–
–	–	2.4068	–	–	–	–	N02201	–	–	–	–	201
LC-Ni 99	Nickel 201	2.4068	–	–	NA12	–	–	–	–	–	–	–
NiMn1	–	2.4106	–	–	–	–	–	–	–	–	–	–
NiMn1C	–	2.4108	–	–	–	–	–	–	–	–	–	–
NiMn1,5	–	2.4109	–	–	–	–	–	–	–	–	–	–
NiMn3Al	–	2.4122	–	–	–	–	–	–	–	–	–	–
NiMn3SiMg	–	2.4126	–	–	–	–	–	–	–	–	–	–
NiCr2Mn	–	2.4145	–	–	–	–	–	–	–	–	–	–
NiCr2MnSi	–	2.4146	–	–	–	–	–	–	–	–	–	–
NiCr5MnSi	–	2.4151	–	–	–	–	–	–	–	–	–	–
SG-NiTi4	–	2.4155	NA 32	–	NA32	–	–	–	–	–	–	–
G-Ni93C	CZ-100	2.4175	–	–	–	–	–	–	–	–	–	–
NiCr4Mn	–	2.4199	–	–	–	–	–	–	–	–	–	–
G-NiCu30Nb	M35-1/2	2.4365	–	–	–	–	N24030	–	–	–	–	–
EL-NiCu30Mn	–	2.4366	–	–	–	–	N04402	–	–	–	–	–
G-NiCu30Si 3	M30-H	2.4367	–	–	–	–	–	–	–	–	–	–
G-NiCu30Si 4	M-255	2.4368	–	–	–	–	–	–	–	–	–	–
NiCu30Al	–	2.4374	–	–	–	–	–	–	–	–	–	–
NiCu30Al	–	2.4375		NU30AT	NA18	–	N05500	–	–	–	–	Monel® K500
SG-NiCu30MnTi	–	2.4377	–	–	NA33	–	–	–	–	–	–	–
NiFe16CuCr	–	2.4501	–	–	–	–	–	–	–	–	–	–
G-NiMo16CrW	–	2.4537	–	–	–	–	–	–	–	–	–	–
NiCr21Mo14 W	–	2.4602	–	–	–	–	N26022	–	–	–	–	INCONEL® alloy 622
NiCr30FeMo	–	2.4603	–	–	–	–	–	–	–	–	–	Hastelloy® G-30
–	–	2.4605	–	–	–	–	N06059	–	–	–	B575	Allcorr
NiCr23Mo16Al	–	2.4605	–	–	–	–	–	–	–	–	–	–
SG/UP-NiCr23Mo16	–	2.4607	–	–	–	–	–	–	–	–	–	–
NiCr26MoW	–	2.4608	–	–	–	–	–	–	–	–	–	–
SG-NiMo27	–	2.4615	–	–	–	–	–	–	–	–	–	–
NiMo28	–	2.4617	–	NiMo28	–	–	N10665	–	–	–	–	–
NiCr22Mo6Cu	–	2.4618	–	–	–	–	–	–	–	–	–	–
–	–	2.4619	–	–	–	–	N06985	–	–	–	–	Hastelloy® G-3
NiCr22Mo7Cu	–	2.4619	–	–	–	–	N06985	–	–	–	–	–
SG-NiCr23Al	–	2.4626	–	–	NA49	–	–	–	–	–	–	–
SG-NiCr22Co12Mo	–	2.4627	–	–	NA50	–	–	–	–	–	–	–
NiCr20Ti	–	2.4630	HR5, 203.4	NC20T	HR5	–	N06075	–	–	–	–	Nimonic® 75
NiCr20TiAl	–	2.4631	HR401, 601	NC20TA	NA20	NCF 80A	N07080	–	–	–	–	Nimonic® 80A
NiCr20Co18Ti	–	2.4632	HR2, 202	NC20KTA	NA36	–	N07090	–	–	–	–	Nimonic® 90
NiCo20Cr15MoAlTi	–	2.4634	HR3	NCKD20ATV	–	–	N13021	–	–	–	–	Nimonic® 105
NiCo15Cr15MoAlTi	–	2.4636	HR401, 601	NCVK15ATD	HR4	–	–	–	–	–	–	Nimonic® 115
NiCo15Cr15MoAlTi	687	2.4636	–	NCKD20AT	–	–	–	–	–	–	–	Udimet® 700
NiCr22Mo8AlCuTi	–	2.4637	–	–	–	–	–	–	–	–	–	–
SG-NiCr20	–	2.4639	–	–	NA34	–	–	–	–	–	–	–
NiCr21 Mo6Cu	–	2.4641	–	–	–	NCF600 TP	–	–	–	–	–	–
NiCr29Fe	–	2.4642	–	NC30Fe	–	NCF690	N06690	–	–	–	–	INCONEL® alloy 690
NiCr25FeAlYC	–	2.4647	–	–	–	–	–	–	–	–	–	–
NiCr20CoMoTi	–	2.4650	HR10	NCK20D	NA38	NCF690	N07263	–	–	–	–	Nimonic® C263
EL-NiCr26Mo	–	2.4652	–	–	–	–	–	–	–	–	–	–
NiCr19Co14 Mo4Ti	–	2.4654	–	NC20K14Y	–	–	N07001	–	–	–	–	Waspaloy®
SG-NiCr29Mo	–	2.4656	–	–	–	–	–	–	–	–	–	–
NiCr7030	–	2.4658	–	–	–	–	N06008	–	–	–	–	–
SG-NiCr30Mo5W	–	2.4659	–	–	–	–	–	–	–	–	–	–
EL-NiCr29 Mo5W	–	2.4661	–	–	–	–	–	–	–	–	–	–
NiFe35Cr14MoTi	–	2.4662	–	Z8NCDT42	–	–	N09901	–	–	–	–	INCOLOY® 901
NiCr13Mo6Ti3	–	2.4662	–	Z8NCDT42	–	–	N09901	–	–	–	–	Nimonic® 901
NiCr23Co12Mo	–	2.4663	–	NC22K12D9A	–	–	N06617	–	–	–	–	INCONEL® alloy 617
NiCr22FeMo	–	2.4665	HR6, 204	NC22FeD	–	–	N06002	–	–	–	–	Hastelloy® X
NiCr22Fe18 Mo	–	2.4665	–	NC22FeD	NA 40	–	N06002	–	–	–	–	INCONEL® alloy HX
NiCr18 CoMo	–	2.4666	–	NKCD20ATU	–	–	–	–	–	–	–	Nimonic® PK25
SG-NiCr19 NbMoTi	–	2.4667	–	–	NA 51	–	–	–	–	–	–	–
NiCr19 FeNbMo	–	2.4668	HR8	NC19FeNb	–	–	N07718	–	–	–	–	INCONEL® alloy 718
NiCr15 Fe7TiAl	–	2.4669	–	NC15Fe7TA	–	–	N07750	–	–	–	–	INCONEL® alloy X750
G-NiCr12 Al6MoNb	–	2.4671	–	–	–	–	–	–	–	–	–	–
G-NiCr20Co20 MoTi	–	2.4672	–	–	–	–	–	–	–	–	–	–
NiCo15Cr10MoAlTi	–	2.4674	–	NK15CAT	–	–	N13100	–	–	–	–	IN 100
NiCo15Cr10MoAlTi	–	2.4674	–	NK15C10A5T	–	–	–	–	–	–	–	René 100
G-NiCo15Cr10 AlTiMo	–	2.4674	–	–	–	–	–	–	–	–	–	–
G-NiCo10W10CrAlNb	–	2.4676	–	–	–	–	–	–	–	–	–	–
G-NiCr50	–	2.4678	–	–	–	–	–	–	–	–	–	–
G-NiCr35	–	2.4679	–	–	–	–	–	–	–	–	–	–
–	–	2.4685	–	–	–	–	N10665	–	–	–	N7M	Hastelloy® B-2
G-NiMo17CrW	CW-12MW	2.4686	–	–	–	–	–	–	–	–	–	–
NiCr25Mo7Ti	–	2.4693	–	–	–	–	–	–	–	–	–	–
NiCr16 Fe7TiAl	–	2.4694	–	–	–	–	N07751	–	–	–	–	INCONEL® alloy 751
G-NiCr20 Mo15	–	2.4697	–	–	–	–	–	–	–	–	–	–
NiCr22W14Mo	–	2.4733	–	–	–	–	–	–	–	–	–	–
NiCr20AlY	–	2.4764	–	–	–	–	–	–	–	–	–	–
NiCr17AlWY	–	2.4765	–	–	–	–	–	–	–	–	–	–
SG-NiCr20Nb	–	2.4806	–	–	NA35	–	–	–	–	–	–	–
G-NiCr50Nb	–	2.4813	–	–	–	–	–	–	–	–	–	–
NiCr15Fe	–	2.4816	NiCr15Fe	NC15Fe	NA14	NCF600	N06600	–	–	–	–	INCONEL® alloy 600
G-NiMo30	–	2.4819	–	NC15D14KFe	–	–	N10276	–	–	–	–	Hastelloy® C-276
NiMo16Cr15W	SB575	2.4819	–	NC17D	–	–	N10276	–	–	–	–	Nimonic® C276
SG-NICr21 Mo9Nb	–	2.4831	–	–	–	–	–	–	–	–	–	–
NiCr20 Mo15	–	2.4836	–	–	–	–	–	–	–	–	–	–
SG-NiCr20Mo15	–	2.4839	–	–	–	–	–	–	–	–	–	–
–	–	2.4851	–	–	–	–	N06601	–	–	–	–	Haynes® 601
NiCr23Fe	–	2.4851	–	NC23Fe14A	–	NCF 601	N06601	–	–	–	–	INCONEL® alloy 601
NiFe33Cr25Co	–	2.4854	–	–	–	–	–	–	–	–	–	–
NiCr19Mo9Si	–	2.4855	–	–	–	–	–	–	–	–	–	–
NiCr22Mo9Nb	SB443	2.4856	–	NC22FeDNb	–	–	N06625	–	–	–	–	Haynes® 625
NiCr22Mo9Nb	SB443.4	2.4856	–	NC22FeDNb	NA21	NCF625	N06625	–	–	–	–	INCONEL® alloy 625
NiCr21Mo	SB163	2.4858	NiCr21Mo	NC21FeDU	–	–	N08825	–	–	–	–	INCOLOY® 825
NiC6015	–	2.4867	–	–	–	–	–	–	–	–	–	–
NiCr8020	–	2.4869	–	–	–	–	–	–	–	–	–	–
NiCr20AlSi	–	2.4872	–	–	–	–	–	–	–	–	–	–
G-NiCr28W	–	2.4879	–	–	–	–	–	–	–	–	–	Centralloy® 4879
NiCr17Mo17FeW	–	2.4883	–	NC17DWY	–	–	N10002	–	–	–	CW12MW	Hastelloy® C
G-NiMo16Cr	–	2.4883	–	–	–	–	–	–	–	–	–	–
SG-NiMo16cr16W	–	2.4886	–	–	NA48	–	–	–	–	–	–	–
G-NiCr13MoAl	–	2.4888	–	–	–	–	–	–	–	–	–	–
NiCr20Ti	–	2.4951	–	NC20T	HR 5	–	N06621	–	–	–	–	–
NiCr20TiAl	–	2.4952	–	NC20TA	NA20	NCF80 A	N07080	–	–	–	–	–
NiFe25Cr20 NbTi	–	2.4955	NiFe 25 Cr 20 NbTi	–	–	–	–	–	–	–	–	–
NiCr20Co18Ti	–	2.4969	–	–	NA19	–	N07090	–	–	–	–	–
NiCr22W12Fe	–	2.4972	–	–	–	–	–	–	–	–	–	–
NiCr19Co11MoTi	–	2.4973	–	NC19KDT	–	–	N07041	–	–	–	–	René 41
NiFeCr12Mo	–	2.4975	–	–	–	–	–	–	–	–	–	–
NiCr20Mo	–	2.4976	–	–	–	–	–	–	–	–	–	–
NiCr20CoMo	–	2.4982	–	–	–	–	–	–	–	–	–	–
NiCr18Co	–	2.4983	–	–	–	–	N07500	–	–	–	–	Co500
NiCr18CoMoAlTi	684	2.4983	–	NCK19DAT	–	–	N07500	–	–	–	–	Udimet® 500
Ni99,6	–	2.4060	–	–	NA46	–	–	–	–	–	–	–
NiMn2	–	2.4110	–	–	–	–	–	–	–	–	–	–
G-Ni95	SZ-100	2.4170	–	–	–	–	–	–	–	–	–	–
G-Ni93Si	–	2.4180	–	–	–	–	–	–	–	–	–	–
NiCu30Fe	–	2.4360	NiCu30Fe	NU30	–	–	N04400	–	–	–	–	Monel® 400
NiCu30Ti	–	2.4370	–	–	–	–	–	–	–	–	–	Monel® 60
NiFe44	–	2.4420	–	–	–	–	–	–	–	–	–	Magnifer 53
NiFe16CuMo	–	2.4530	–	–	–	–	–	–	–	–	–	Perm 77
NiFeK6040	–	2.4560	–	–	–	–	–	–	–	–	–	–
NiMo16Cr16Ti	–	2.4610	–	–	NA45	–	N26455	–	–	–	–	Hastelloy C-4
–	–	2.4660	–	20CB-3	–	–	–	–	–	–	ASTM B463	INCOLOY® 020
NiCr20CuMo	–	2.4660	–	–	–	–	N08020	–	–	–	–	–
G-NiCr 13 Al 16 MoNb	–	2.4670	HC203	NC13AD	–	–	–	–	–	–	–	Nimocast 713
G-NiCr50Nb	–	2.4680	–	–	–	–	–	–	–	–	–	–
NiMo23Cr8Fe	–	2.4710	–	–	–	–	–	–	–	–	–	–
NiMo30	–	2.4810	–	ND27FeV	–	–	–	–	–	–	N-12 MV	Hastelloy® B
NiCr4523	–	2.4890	–	–	–	–	–	–	–	–	–	–
–	–	–	–	NK17C15D5AT	–	–	N13017	–	–	–	–	Astroloy
–	–	–	–	–	–	–	–	–	–	–	–	Centralloy® 60HTD
–	686	–	–	NC15Fe10D5AT	–	–	–	–	–	–	–	GMR 235
NiCr16MoAl	–	–	–	NC15D5FeAT	–	–	–	–	–	–	–	GMR 235-D
–	–	–	–	–	–	–	–	–	–	–	CW6M	Hastelloy® C-22
–	–	–	–	NC22Fe19D6KTa	–	–	N06007	–	–	–	–	Hastelloy® G
–	–	–	–	–	–	–	N10003	–	–	–	–	Hastelloy® N
–	–	–	–	NC15D14KFe	–	–	N06635	–	–	–	–	Hastelloy® S
–	–	–	–	–	–	–	N10004	–	–	–	–	Hastelloy® W
–	–	–	–	NC20K20D6T	–	–	N07263	–	–	–	–	Haynes® 263
–	–	–	–	–	–	–	–	–	–	–	–	Haynes® 282
NiCr15Fe	–	–	–	–	–	–	N06600	–	–	–	–	Haynes® 600
–	–	–	–	–	–	–	–	–	–	–	–	Haynes® 75
NiCo32Cr26Mo	–	–	–	–	–	–	–	–	–	–	–	HS27
–	–	–	–	–	–	–	N06102	–	–	–	–	IN 102
X10NiCrAlTi 3220	SB409	–	X10NiCrAlTi 3220	Z10NC3221	–	–	N08800	–	–	–	–	INCOLOY® 800
–	–	–	–	Z4NC3221	–	–	–	–	–	–	–	INCOLOY® 802
–	–	–	–	NC29Fe25	–	–	–	–	–	–	–	INCOLOY® 804
NiFe42K15Nb	–	–	–	Z3NK28	–	–	N19903	–	–	–	–	INCOLOY® 903
–	–	–	–	–	–	–	N19907	–	–	–	–	INCOLOY® 907
–	–	–	–	–	–	–	N09925	–	–	–	–	INCOLOY® 925
–	–	–	–	–	–	–	N09945	–	–	–	–	INCOLOY® 945
–	SB575	–	–	NiMo16Cr15	–	–	–	–	–	–	–	INCONEL® alloy 22
–	–	–	–	–	–	–	–	–	–	–	–	INCONEL® alloy 230
–	–	–	–	–	–	–	–	–	–	–	–	INCONEL® alloy 600SP
–	–	–	–	–	–	–	–	–	–	–	–	INCONEL® alloy 62
–	–	–	–	–	–	–	N06626	–	–	–	–	INCONEL® alloy 625LCF
–	–	–	–	NC15A	–	–	–	–	–	–	–	INCONEL® alloy 702
–	–	–	–	NFe10C16NbT	–	–	N09706	–	–	–	–	INCONEL® alloy 706
–	–	–	–	–	–	–	N07718	–	–	–	–	INCONEL® alloy 718 OP
–	–	–	–	NC16Fe8TM	–	–	–	–	–	–	–	INCONEL® alloy 721
NiCr16FeTi	–	–	–	NC16FeTi	–	–	N07722	–	–	–	–	INCONEL® alloy 722
–	–	–	–	–	–	–	R30783	–	–	–	–	INCONEL® alloy 783
–	–	–	–	–	–	–	N09925	–	–	–	B983 N09925	INCONEL® alloy 925
–	–	–	–	–	–	–	N10276	–	–	–	–	INCONEL® alloy C-276
–	–	–	–	–	–	–	N07754	–	–	–	–	INCONEL® alloy MA754
–	–	–	–	–	–	–	N07751	–	–	–	–	INCONEL® alloy X751
–	–	–	–	–	–	–	K93600 K93603	–	–	–	F1684	INVAR® 36
NiCr20Co18 Ti	–	–	–	–	–	–	–	–	–	–	–	Jessop G81
G-NiCr19Co	–	–	–	–	–	–	N07252	–	–	–	–	M 252
–	–	–	–	–	–	–	N04405	–	–	–	–	Monel® R405
NiFe 33 Cr 17 Mo	–	–	–	–	–	–	–	–	–	–	–	Nimocast PD16
–	–	–	HC202	NC20N13	–	–	–	–	–	–	–	Nimocast PE10
–	–	–	–	NC19K18Fe5TA	–	–	–	–	–	–	–	Nimonic® 95
–	SB575	–	–	–	–	–	N06022	–	–	–	–	Nimonic® C22
NiCr22Fe18Mo	–	–	HR6, 204	NC22FeD	–	–	–	–	–	–	–	Nimonic® PE13
NiFe33Cr17Mo	–	–	HR207	NW11AC	–	–	–	–	–	–	–	Nimonic® PE16
NiCr20Co16MoTi	–	–	–	NC19KDUN	–	–	–	–	–	–	–	Nimonic® PK33
–	–	–	–	–	–	NCF3015	–	–	–	–	–	NiReVa 3015
–	686	–	–	–	–	–	–	–	–	–	–	R-235
–	690	–	–	Z6NKCDT38	–	–	–	–	–	–	–	Refractaloy 26
–	–	–	–	NK10C8W7ATaTD	–	–	–	–	–	–	–	René 125
–	–	–	–	NK15C14D6AWT	–	–	–	–	–	–	–	René 65
–	–	–	–	NC15K15ADT	–	–	–	–	–	–	–	René 77
–	–	–	–	NC14K9T5DWA	–	–	–	–	–	–	–	René 80
–	–	–	–	NC14K8	–	–	–	–	–	–	–	René 95
NiTa9Co8W6CrAl	–	–	–	NTa9K7C6W5A5DT	–	–	–	–	–	–	–	TRW VIA
NiCr19NbMo	–	–	–	NC18Fe18Nb6DWT	–	–	–	–	–	–	–	Udimet® 630
–	–	–	–	NCK18TDA	–	–	–	–	–	–	–	Udimet® 710
–	–	–	–	NC18K15TDA	–	–	–	–	–	–	–	Udimet® 720
NiFe 33 Cr 17 Mo	–	–	–	–	–	–	–	–	–	–	–	Nimocast PD16
–	–	–	HC202	NC20N13	–	–	–	–	–	–	–	Nimocast PE10
–	–	–	–	NC19K18Fe5TA	–	–	–	–	–	–	–	Nimonic® 95
–	SB575	–	–	–	–	–	N06022	–	–	–	–	Nimonic® C22
NiCr22Fe18Mo	–	–	HR6, 204	NC22FeD	–	–	–	–	–	–	–	Nimonic® PE13
NiFe33Cr17Mo	–	–	HR207	NW11AC	–	–	–	–	–	–	–	Nimonic® PE16
NiCr20Co16MoTi	–	–	–	NC19KDUN	–	–	–	–	–	–	–	Nimonic® PK33
–	–	–	–	–	–	NCF3015	–	–	–	–	–	NiReVa 3015
–	686	–	–	–	–	–	–	–	–	–	–	R-235
–	690	–	–	Z6NKCDT38	–	–	–	–	–	–	–	Refractaloy 26
–	–	–	–	NK10C8W7ATaTD	–	–	–	–	–	–	–	René 125
–	–	–	–	NK15C14D6AWT	–	–	–	–	–	–	–	René 65
–	–	–	–	NC15K15ADT	–	–	–	–	–	–	–	René 77
–	–	–	–	NC14K9T5DWA	–	–	–	–	–	–	–	René 80
–	–	–	–	NC14K8	–	–	–	–	–	–	–	René 95
NiTa9Co8W6CrAl	–	–	–	NTa9K7C6W5A5DT	–	–	–	–	–	–	–	TRW VIA
NiCr19NbMo	–	–	–	NC18Fe18Nb6DWT	–	–	–	–	–	–	–	Udimet® 630
–	–	–	–	NCK18TDA	–	–	–	–	–	–	–	Udimet® 710
–	–	–	–	NC18K15TDA	–	–	–	–	–	–	–	Udimet® 720
NiFe 33 Cr 17 Mo	–	–	–	–	–	–	–	–	–	–	–	Nimocast PD16
–	–	–	HC202	NC20N13	–	–	–	–	–	–	–	Nimocast PE10
–	–	–	–	NC19K18Fe5TA	–	–	–	–	–	–	–	Nimonic® 95
–	SB575	–	–	–	–	–	N06022	–	–	–	–	Nimonic® C22
NiCr22Fe18Mo	–	–	HR6, 204	NC22FeD	–	–	–	–	–	–	–	Nimonic® PE13
NiFe33Cr17Mo	–	–	HR207	NW11AC	–	–	–	–	–	–	–	Nimonic® PE16
NiCr20Co16MoTi	–	–	–	NC19KDUN	–	–	–	–	–	–	–	Nimonic® PK33
–	–	–	–	–	–	NCF3015	–	–	–	–	–	NiReVa 3015
–	686	–	–	–	–	–	–	–	–	–	–	R-235
–	690	–	–	Z6NKCDT38	–	–	–	–	–	–	–	Refractaloy 26
–	–	–	–	NK10C8W7ATaTD	–	–	–	–	–	–	–	René 125
–	–	–	–	NK15C14D6AWT	–	–	–	–	–	–	–	René 65
–	–	–	–	NC15K15ADT	–	–	–	–	–	–	–	René 77
–	–	–	–	NC14K9T5DWA	–	–	–	–	–	–	–	René 80
–	–	–	–	NC14K8	–	–	–	–	–	–	–	René 95
NiTa9Co8W6CrAl	–	–	–	NTa9K7C6W5A5DT	–	–	–	–	–	–	–	TRW VIA
NiCr19NbMo	–	–	–	NC18Fe18Nb6DWT	–	–	–	–	–	–	–	Udimet® 630
–	–	–	–	NCK18TDA	–	–	–	–	–	–	–	Udimet® 710
–	–	–	–	NC18K15TDA	–	–	–	–	–	–	–	Udimet® 720
NiFe 33 Cr 17 Mo	–	–	–	–	–	–	–	–	–	–	–	Nimocast PD16
–	–	–	HC202	NC20N13	–	–	–	–	–	–	–	Nimocast PE10
–	–	–	–	NC19K18Fe5TA	–	–	–	–	–	–	–	Nimonic® 95
–	SB575	–	–	–	–	–	N06022	–	–	–	–	Nimonic® C22
NiCr22Fe18Mo	–	–	HR6, 204	NC22FeD	–	–	–	–	–	–	–	Nimonic® PE13
NiFe33Cr17Mo	–	–	HR207	NW11AC	–	–	–	–	–	–	–	Nimonic® PE16
NiCr20Co16MoTi	–	–	–	NC19KDUN	–	–	–	–	–	–	–	Nimonic® PK33
–	–	–	–	–	–	NCF3015	–	–	–	–	–	NiReVa 3015
–	686	–	–	–	–	–	–	–	–	–	–	R-235
–	690	–	–	Z6NKCDT38	–	–	–	–	–	–	–	Refractaloy 26
–	–	–	–	NK10C8W7ATaTD	–	–	–	–	–	–	–	René 125
–	–	–	–	NK15C14D6AWT	–	–	–	–	–	–	–	René 65
–	–	–	–	NC15K15ADT	–	–	–	–	–	–	–	René 77
–	–	–	–	NC14K9T5DWA	–	–	–	–	–	–	–	René 80
–	–	–	–	NC14K8	–	–	–	–	–	–	–	René 95
NiTa9Co8W6CrAl	–	–	–	NTa9K7C6W5A5DT	–	–	–	–	–	–	–	TRW VIA
NiCr19NbMo	–	–	–	NC18Fe18Nb6DWT	–	–	–	–	–	–	–	Udimet® 630
–	–	–	–	NCK18TDA	–	–	–	–	–	–	–	Udimet® 710
–	–	–	–	NC18K15TDA	–	–	–	–	–	–	–	Udimet® 720
NiFe 33 Cr 17 Mo	–	–	–	–	–	–	–	–	–	–	–	Nimocast PD16
–	–	–	HC202	NC20N13	–	–	–	–	–	–	–	Nimocast PE10
–	–	–	–	NC19K18Fe5TA	–	–	–	–	–	–	–	Nimonic® 95
–	SB575	–	–	–	–	–	N06022	–	–	–	–	Nimonic® C22
NiCr22Fe18Mo	–	–	HR6, 204	NC22FeD	–	–	–	–	–	–	–	Nimonic® PE13
NiFe33Cr17Mo	–	–	HR207	NW11AC	–	–	–	–	–	–	–	Nimonic® PE16
NiCr20Co16MoTi	–	–	–	NC19KDUN	–	–	–	–	–	–	–	Nimonic® PK33
–	–	–	–	–	–	NCF3015	–	–	–	–	–	NiReVa 3015
–	686	–	–	–	–	–	–	–	–	–	–	R-235
–	690	–	–	Z6NKCDT38	–	–	–	–	–	–	–	Refractaloy 26
–	–	–	–	NK10C8W7ATaTD	–	–	–	–	–	–	–	René 125

Titanium and Titanium Alloys Tensile Strength RM (MPa): 900–1600 - Hardness (HB): 300–400 (HRC): 33–48
DIN	AISI (SAE-ASTM)	Material Number	EN	AFNOR	BTS	JIS	UNS	UNI	SIS	SAE	ASTM	Manufacturer Reference
Ti-99.8	R50250	3.7025	TA6 - TA7 - TA8 - TA9	9182T35	2TA1	–	R50250	–	–	–	B381f4	–
Ti-99.7	R50400	3.7035	TA2.5	9182T40	2TA2-5	–	R50400	–	–	–	B381F2	–
SG-Ti 2	–	3.7036	–	–	–	–	–	–	–	–	–	–
Ti-99.6	R50550	3.7055	TA2 - TA3 - TA4 - TA5	9182T50	TA3	–	R50550	–	–	–	B381F3	–
Ti-99.5	R50700	3.7065	–	9182T60	2TA6-9	–	R50700	–	–	–	B381F4	–
TiNi 0,8 Mo 0.3	–	3.7105	–	–	–	–	R53400	–	–	Ti-3Al-1.5Mn	Grade 12	–
TiAl 5 Sn 2.5	Ti5Al-2.5Sn	3.7115	TA 14-17	T-A5E	–	–	R54520	–	–	Ti-5Al-2.5Sn	–	–
TiCu 2	–	3.7124	–	–	2TA21-24	–	–	–	–	Ti-2Cu	–	–
TiAl 6Sn2Zr4Mo 2Si	R54620	3.7145	–	–	–	–	R54620	–	–	Ti-6Al-2Sn-2Zr-4Mo-2Si	–	–
TiAl6ZrMo0.5	–	3.7155	–	–	TA43	–	–	–	–	Ti-6-5-0-5	–	–
TiAl6V4	R56400	3.7164	TA10 - TA11 - TA12 - TA13 - TA28 - TA56	TA6V	TA10-13	TC4	R56400	–	–	Ti-6Al-4V	–	–
TiAl6V4	–	3.7164	TA10 - TA11 - TA12 - TA13 - TA28 - TA56	TA6V - 9183	–	TC4	R56400	–	–	Ti-6Al-4V (Beta)	–	–
TiAl6V6Sn2	R56620	3.7175	–	–	–	–	R56620	–	–	Ti-6Al-6V-2Sn	–	–
TiAl4Mo 4Sn2	–	3.7185	–	–	TA45-51	–	–	–	–	Ti-4Al-4Mo-2Sn	–	–
TiAl3V2.5	–	3.7195	–	–	–	–	R56320	–	–	Ti-3Al-2.5V	Grade 9	–
		3.7225
Ti2Pd	R52400	3.7235	–	–	–	–	R52400	–	–	–	Grade 7	–
Ti3Pd	–	3.7255	–	–	–	–	–	–	–	–	–	–
TiAl5Fe2.5	–	3.7110	–	–	–	–	–	–	–	Ti-5Al-2.5Fe	–	–
TiV13Cr11Al3	–	–	–	–	–	–	–	–	–	Ti-13V-11Cr-3Al	–	–
Ti-10V-2Fe-3Al	–	–	–	–	–	–	–	–	–	Ti-10-2-3	–	–
–	–	–	–	–	–	–	R58153	–	–	Ti-15-333	–	–
–	–	–	–	–	–	–	–	–	–	Ti-15Mo (Alpha + Beta)	–	–
–	–	–	–	–	–	–	–	–	–	Ti-15Mo (Beta)	–	–
Ti5Al2Sn2Zr4Cr4Mo	–	–	–	–	–	–	R58650	–	–	–	–	–
TIAl3V8Cr6Mo4Z4	–	–	–	–	–	–	–	–	–	Ti-3Al-8V-6Cr-4Mo-4Zr	Grade 19	–
–	–	–	–	–	–	–	R54250	–	–	Ti-425	B265	–
–	–	–	–	–	–	–	–	–	–	Ti-425 MIL	–	–
TiAl4Mo4Sn2Si0.5	–	–	5103	T-A4DE	–	–	–	–	–	Ti-4Al-4Mo-2Sn-0.5Si	–	–
–	–	–	–	–	–	–	–	–	–	Ti-45Nb	–	–
–	–	–	–	–	–	–	–	–	–	Ti-5Al-5V-5Mo-3Cr	–	–
–	–	–	–	–	–	–	–	–	–	Ti-6Al-2Sn-2Zr-2Mn-2Cr-0-2Si	–	–
–	–	–	–	–	–	–	R54620	–	–	Ti-6Al-4Zr-2Mo-2Sn	–	–
TiAl6Zr4Mo2Sn2	–	–	–	–	–	–	R54620 modiﬁed	–	–	Ti-6Al-4Zr-2Mo-2Sn-0.2Si	–	–
–	–	–	–	–	–	–	R56260	–	–	Ti-6-2-4-6	–	–
–	–	–	–	–	–	–	R56401	–	–	Ti-6Al-4V ELI	–	–
TiAl6V4	–	–	TA10 TA11 TA12 TA13 TA28 TA56	TA6V - 9183	–	–	R56400	–	–	Ti-6Al-4V MIL	–	–
TiAl6V4	–	–	TA10 TA11 TA12 TA13 TA28 TA56	TA6V - 9183	–	–	R56400	–	–	Ti-6Al-4V MIL (HT)	–	–
–	–	–	–	–	–	–	R56700	–	–	Ti-6-7	F 1295	–
TiAl8Mo1V1	–	–	–	–	–	–	R54810	–	–	Ti-8Al-1Mo-1V	–	–
–	–	–	–	–	–	–	–	–	–	Ti-15Mo-3Nb-3Al-0-2Si	Grade 21	–
–	–	–	–	–	–	–	–	–	–	Ti-12Mo-6Zr-2Fe	–	–
TiAl7Nb	–	–	–	–	–	–	–	–	–	Ti-6Al-7Nb	–	–
TiAl7Mo4	–	–	–	–	–	–	–	–	–	–	B381	–
TiAl4Mo4Sn4Si0.5	–	–	5203	–	–	–	–	–	–	Ti-4Al-4Mo-4Sn-0-5Si	–	–
TiA6Zr5Mo0.5Si0.25	–	–	–	TAGZ50	–	–	–	–	–	Ti-6Al-5Zr-0.5Mo-0-25Si	–	–
TiAl6Zr5Mo4CuSi0.2	–	–	M201	–	–	–	–	–	–	Ti-6Al-5Zr-4Mo-Cu-0-2Si	–	–
–	–	–	–	–	–	TC18	–	–	–	Ti-5Al-5Mo-5V-1Cr-1Fe	–	–
–	–	–	–	–	–	–	R58210	–	–	TiBeta21S	Grade 21	–
Ti98.8	Ti98.8	–	–	–	–	–	–	–	–	–	–	–
Ti99.9	Ti99.9	–	–	–	–	–	–	–	–	–	–	–
TiAL6Sn2Zr4Mo 2	–	–	–	–	–	–	–	–	–	–	–	–

Hardened Steels and Irons Hardened Materials Hardness (HRC): 44–48
DIN	AISI (SAE-ASTM)	Material Number	EN	AFNOR	BTS	JIS	UNS	UNI	SIS	SAE	ASTM	Manufacturer Reference
X38CrMoV5-H1	H 11	1.2343	X38CrMoV5H1	Z38CDV5	BH 11	SKD 6	T20811	X37CrMoV51KU	–	–	–	–
X38CrMoV5-H1	H11	1.2343	X38CrMoV5H1	Z38CDV5	BH 11	SKD 6	T20811	X37CrMoV51KU	–	–	–	–
X40CrMoV51	H 13	1.2344	X40 CrMoV51	Z40CDV5	BH 13	SKD 61	T20813	X40CrMoV511KU	2242	–	–	–
X32CrMoV33	H 10	1.2365	X32CrMoV12H-28	32DCV28	BH 10	SKD 7	T 20810	30CrMoV1227KU	–	–	–	–
X45CrCoVW555	H19	1.2678	–	–	–	–	–	–	–	–	–	–
GX260NiCr42	A 532 I B NiCr-LC	0.9620	GJH-X260NiCr 4-2	–	Grade 2 A	0512-00	F45001	–	0512-00	–	–	–
–	L6	–	–	55NCDV07(HT)	–	–	–	–	–	–	–	–

Hardened Steels and Irons Hardened Materials Hardness (HRC): 48–55
DIN	AISI (SAE-ASTM)	Material Number	EN	AFNOR	BTS	JIS	UNS	UNI	SIS	SAE	ASTM	Manufacturer Reference
G-X330NiCr42	A 532 I A NiCr-HC	0.9625	GJH-X330NiCr4-2	FBNi4Cr2HC	Grade 2 B	0513-00	F45000	–	0513-00	–	–	–
X30WCrV93	H 21	1.2581	X30WCrV93	Z30WCV9	BH 21	SKD 5	T 20821	X30WCrV93KU	–	–	–	–
X-37CrMoW5-1	H 12	1.2606	–	Z 5CWD5	BH 12	SKD 62	T20812	X35CrMoW05KU	–	–	–	–
G-X300NiMo3Mg	–	0.9610	GJH-X300NiMo3Mg	–	–	–	–	–	–	–	–	–
GX260NiCr42	A 532 I B NiCr-LC	0.9620	GJH-X260NiCr42	–	Grade 2 A	0512-00	F45001	–	0512-00	–	–	–
GX260Cr27	A 532 III A 25% Cr	0.9650	GJH-X260Cr27	–	Grade 3 D	0466-00	–	–	–	–	–	–
X2NiCoMoTi180905	–	–	–	Z2NKD180905	–	–	–	–	–	–	–	Durimphy
–	K12	–	–	–	–	–	–	–	–	–	–	–

Hardened Steels and Irons Hardened Materials - Hardness (HRC): 56–60
DIN	AISI (SAE-ASTM)	Material Number	EN	AFNOR	BTS	JIS	UNS	UNI	SIS	SAE	ASTM	Manufacturer Reference
GX300CrMo15-3	A532 IIC15% CrMo-HC	0.9635	GJH-X300CrMo15-3	–	Grade 3 A	–	–	–	–	–	–	–
GX300CrMoNi 15-2-1	–	0.9640	GJH-X300CrMoNi15-2-1	–	Grade 3 B	–	F45005	–	–	–	–	–
GX260 CrMoNi 20 2 1	A532 IID20% CrMo-LC	0.9645	GJH-X260CrMoNi20-2-1	–	Grade 3 C	–	F45007	–	–	–	–	–
GX300CrMo27 1	A532 III A 25% Cr	0.9655	GJH-X300CrMo27-1	–	Grade 3 E	–	–	–	–	–	–	–
X100CrMoV5 1	A2	1.2363	BA2	Z100CDV5 (HT)	SKD 12	–	–	X100CrMoV5 KU	2260	–	–	–
–	D7 (HT)	1.2378	–	Z230CVA1204	–	–	T30407	–	–	–	–	–
90MnCrV8	O2	1.2842	90MnV8	90MnV8	BO 2	–	T31502	90MnVCr8KU	–	–	–	–
GX300CrNiSi 95 2	A532IDNi-HiCr	0.9630	GJH-X300CrNiSi 9-5-2	–	Grade 2 C	0457-00	F45003	–	–	–	–	Nihard type 4
60WCrV7	S1	1.2550	6020 WCrV8	55WC20	BS 1	–	–	55WCrV8KU	–	–	–	–
60 WCrV7	S1	1.2550	60 WCrV8	55WC20	BS 1	–	–	55WCrV8UK	–	–	–	–
50CrMoV1314	S7	–	–	–	–	–	–	–	–	–	–	Cryodur 2357
–	K12 (HT)	–	–	–	–	–	–	–	–	–	–

Hardened Steels and Irons Hardened Materials - Hardness (HRC): >60
DIN	AISI (SAE-ASTM)	Material Number	EN	AFNOR	BTS	JIS	UNS	UNI	SIS	SAE	ASTM	Manufacturer Reference
C80W1	W108	1.1525	C 80 U	Y190	–	–	T72301	C80 KU	1880	–	–	–
X155CrVMo121	D2	1.2379	X153CrMoV12	Z160 DV12	BD 2	SKD --	T 30402	X155CrVMo121KU	2310	–	–	–
100WV4	–	1.2515	–	–	–	SKS 21	–	–	–	–	–	–
X210Cr12	D3	1.2080	X21 Cr12	Z200C12	BD 3	SKD 1	T30403	X205Cr12KU	–	–	–	–
110WCrV5	O7	–	–	–	–	–	–	–	–	–	–	–
Mh97+ Pb	–	–	–	–	–	–	–	–	–	–	–	LAW 100 Pb

Nous utilisons des alliages sous différents grades provenant de tous les élaborateurs internationaux.
Les noms Inconel®, Hasteloy®, Incoloy®, Nimonic®, Monel® sont des marques déposées de Special Metals™ Incorporation.

Important : Ces tableaux sont donnés à titre indicatif et sans engagement de notre part.
Les données ne se substituent pas à celles des normes en vigueur régulièrement tenue à jour.